A10-RX

Two Channel Digital Diversity Receiver

 

Disponibilidad : 7 días

Pedir presupuesto

The new A10 Digital Wireless System is designed for the technical demands and requirements of today’s RF-hostile, multi-channel productions. The A10-TX bodypack transmitter and portable A10-RX receiver provide users with broadcast-quality audio, reliable digital RF performance, and easy multi-system setup. Its proprietary digital RF topology and Advanced Digital Diversity is the result of years of research, laboratory experimentation, and customer experience. The result is a wireless link with full 20 kHz audio bandwidth, high dynamic range, ultra-low distortion, and industry leading 2 millisecond end-to-end delay.

The A10 Digital Wireless System operates in the 470 MHz to 694 MHz UHF band (frequency ranges are country-dependent).
Its spectrally efficient digital modulation enables up to twenty A10 Digital Wireless Systems to simultaneously operate in a single
8 MHz TV channel. Multiple simultaneous systems operate without compromising RF range, audio quality, or latency.

 The two-channel A10-RX receiver is an advanced digital tool that works with either one or two A10-TX transmitters. With its Advanced Digital Diversity System the A10-RX receiver selects the best signal between each channel’s two receivers. When at the limits of system operation ADDS combines error-free digital packets from each receiver. This results in lossless, wireless digital audio up to the absolute limits of operation.

The A10-RX is offered in two versions, the A10-RX-SL for uni- and Superslot mounting, and the A10-RX-XLR for stand-alone operation in a production bag.

Referencia CINESOL : A10-RX

  • Tunes over the full system bandwidth of 470 to 694 MHz
  • 4 complete digital receiver circuits (two per channel)
  • Advanced Digital Diversity System (ADDS) selects the receiver with the best RF signal and combines weak signals
  • Two versions available: Uni/Super-slot & XLR with Hirose 4-pin connector

2 versions of the A10-RX Receiver are available:

  • A10-RX-SL: for uni- and Superslot mounting
    (Uni-/Superslot receiver with DB-25 connector)
    Ref: A10-RX-SL

  • A10-RX-XLR: for stand-alone operation in a production bag
    (XLR and Hirose 4-pin connector)
    Ref: A10-RX-XLR
World Models: A10-RX-SL – Uni-/Superslot receiver with DB-25 connector
A10-RX-XLR – XLR and Hirose 4-pin connector
Operating Frequency Range 470-694 MHz
USA Models: A10-RX-SL-US – Uni-/Superslot receiver with DB-25 connector
A10-RX-XLR-US – XLR and Hirose 4-pin connector
Operating Frequency Range 470-608 MHz
Switching Bandwidth Tuneable in 25 kHz steps throughout the 224 MHz receiver tuning range
Audio Frequency Response 20 Hz-20 kHz
Output Gain Control 0 dB (+12 dBv) to -36 dB in 12 dB steps, menu controlled
Output – Analog Balanced mic- or line-level, line level over Uni/Superslot
Output Digital AES3 (balanced), two channel
Menu 3-button navigation, OLED display
Powering 6–18 VDC
Operating temperature range -10° C to +55° C
Weight 180 g
Dimensions 124 x 68 x 18 mm

Product Support

Si deseas extender la garantía de tu aparato de un año a dos, solo tienes que registrarlo en el sitio de Sound Devices.

¡Registralo ahora !

Más información, articulos técnicos y comentarios sobre este producto, y mucho más en la página web dedicada de Audio Limited.

¡Vélo ahora!

¿Este producto te interesa?